Projects




HYDROCELL MULTI-MEDIA FILTERS
Flow rates from 1 to 2,000 GPM
Less than 5 PPM TSS effluent
Excellent choice for re-use or polishing applications
Modular design: Pre-plumbed and skid based
HYDROCELL MULTI-MEDIA FILTERS
Flow rates from 1 to 2,000 GPM
Less than 5 PPM TSS effluent
Excellent choice for re-use or polishing applications
Modular design: Pre-plumbed and skid based
HYDROCELL MULTI-MEDIA FILTERS
Flow rates from 1 to 2,000 GPM
Less than 5 PPM TSS effluent
Excellent choice for re-use or polishing applications
Modular design: Pre-plumbed and skid based
Slider

HydroFloTech HydroCell Multi-Media Filters are permanent Multi-Media media filters with automatic backwashing and are ideal for removing organic and/or inorganic suspended solids down to 20 microns in size. HydroFloTech in-line HydroCell Multi-Media filters are ideally suited for use in water re-use applications, polishing, water pre-treatment applications (for reverse osmosis and deionization systems, etc.) or as a pre-treatment prior to disposal bag or cartridge filters

HydroCell Multi-Media Filters

HydroFloTech HydroCell Multi-Media Filters are designed for general-purpose water filtration. Through the use of automatically controlled backwashing, the filter will operate “on-line” for extended periods of time prior to the short backwashing cycle. Automatic filter operation is monitored on elapsed time, as well as pressure differential. When the controller “calls” for a backwash as a result of pressure differential or elapsed time, the backwashing function utilizes a portion of the clean filtered water produced by the system to clean the media. Single tank systems utilize unfiltered water for backwashing. Optional external backwash water sourcing systems are available for both single and multiple tank systems.

The standard HydroCell filter utilizes a vertical side shell design with a diameter of 24”. Optional 36” diameter designs are also available. HydroFloTech HydroCell Media filters feature catalyzed epoxy linings, cast iron automatic valves, solid state automatic controls and type 304 stainless steel underdrains. Standard HydroCell Media Filter Systems are shipped assembled on structural steel skids for easy installation and start-up. Standard inlet and outlet connections are flanged, but may be ordered grooved as an option. Air scour and surface wash options are available if required.