HFT

Hydro-Flo Technologies, Inc.

The Art and Science... of Wastewater Treatment

A "Green" company
 since 1990

                   

HFT HOME

Hydro-Flo Technologies, Inc

Products

Chemical Reaction Systems
Batch Treatment

pH Adjustment Systems

pH Neutralization Systems

Sequential Multi-Process
  Batch Treatment Systems

Chemical Reaction Systems
Continuous Flow

pH Adjustment Systems

pH Neutralization Systems

Multi Stage Chemical
  Reaction Systems

Flash Mix & Flocculation
  Systems

Clarifiers

LS Series Inclined Plate
  (IPC) Clarifiers

ClariMax Inclined Plate
  (IPC) Clarifiers

Control Panels

Relay Logic Based Panels

UL 508A

UL 698A (Intrinsically Safe)

Explosion Proof

PLC Systems

HMI Programming

SCADA Systems

Wireless Technology

Data Logging

Standards Compliance

Flotation Systems

Dissolved Air Flotation (DAF)

Media Filters

Deep Bed Sand

High Rate Sand

Multi-Media

Oil Water Separators

API

Enhanced Gravity Separators

Pressure Rated

Media Packs

DynaPac Cross Corrugated
  Coalescing Media

Pump Packges

Electric Pump Packages

Pneumatic Pump Packages

HFT....

About Us

Company Profile

Customer List

Contact Us

Phone, E-mail, Fax, Etc...

Why Choose
Hydro-Flo Technologies

Request a Quote

E-Mail this page

E-Mail Us

 

 

Engineering Tools

Typical Applications

Follow this link to our library of application P&ID's and process descriptions

Application Questionnaire

Follow this link to our equipment application questionnaire

Clarifier Sizing information

Plate Settler Theory of Operation

Clarifier Settling / Cross Sectional Velocity Calculations

Test for Determination of Clarifier Hydraulic Loading Ratio

Clarifier Sizing Spreadsheet

Oil Water Separator Sizing information

Oil Water Separator Theory of Operation

Oil Water Separator Design Parameters

Test for Susceptibility of Separation of Oil from Water in a Gravity Type Oil/Water Separator

Enhanced Gravity (DynaPak, CPI, TPI, Parallel Plate) Type OWS Sizing Spreadsheet

API OWS Sizing Spreadsheet

Misc Info, Data, Spreadsheets & Calculations

EPA Non-Polar oil test methods

Fluid Mechanics

Reynolds Number Calculations

Water Hammer Calculations

HFT Quality Control

HFT Quality Assurance Plan

Steel Fabrications

Leak Test Certification

Interior Coatings

Exterior Coatings

Control Panels

Chemical / Material Compatibility Data

Chemical Pump Dosing Rates

Chemical Compatibility Chart

Properties of Plastic

Coating Data

Surface Prep Definitions

HydroCell Multi-Media Filters
Equipment Overview

Hydro-Flo Automatic Backwashing Multi-Media Filters are designed for enhanced water quality filtration. These permanent media automatic backwashing filters will remove organic and/or inorganic suspended solids down to 5 microns and below in size and will entrap greater amounts of suspended solids contaminants than sand media filters. Through the use of automatically controlled backwashing, the filter will operate "on-line" for extended periods of time prior to the short backwashing cycle. Automatic filter operation is monitored on both elapsed time as well as pressure differential. When the controller "calls" for a backwash as a result of pressure differential or elapsed time, the backwashing function utilizes a portion of the clean filtered water produced by the system to clean the media bed. Single tank systems utilize unfiltered water for backwashing. Optional external backwash water sourcing systems are available for both single and multiple tank systems.

The Hydro-Flo Multi-Media Filter utilizes a vertical side shell depth of 60" with layered graded beds of filtration media. Through the use of multiple layers of specially selected filter media, "progressive filtration" is achieved through the media layers. The first layer of filter media entraps and holds larger sized particles allowing smaller particles to be removed in subsequent media layers. The final media layer "polishes" the water removing suspended solids down to 5 microns in size and smaller

Hydro-Flo Multi-Media Filters are ideally suited for use where stringent water quality standards are required or where higher levels of suspended solids are present. These applications can include water re-use applications, water pre-treatment applications for reverse osmosis and de-ionization systems, or as a pre-treatment system prior to disposable bag or cartridge filters. Hydro-Flo Multi-Media Filters are also widely used as primary filters for removal of suspended solids in incoming plant water or in waste water clean up applications. Air scour and surface wash options are available if required.

Equipment Design Data & Sizing Calculations

Detailed
  HydroCell Muiti-Media
  Filter Description

Application Questionnaire

Drawings
 

General Arrangement
  Drawing

Specifications
 

• Standard Engineering
  Specification

Installation, Operation & Maintenance Manuals

Standard IO&M Manual

 

Available Options

  • Available in Epoxy coated carbon steel, Stainless steel, Polypropylene, FRP, exotic alloys and all thermoplastics for long life and superior corrosion resistance
  • Influent Equalization
  • Influent / Effluent Lift Stations
  • On Board Reagent Storage (Day Tanks)
  • Ultrasonic level control
  • Duplex Systems for Redundancy
  • Effluent pump
  • SCADA System Monitoring
  • Final Effluent Monitoring
  • Final Effluent Sampling
  • Explosion-Proof Design

Features and Benefits

  • Skid Mounted
  • Pre-piped
  • Pre-wired
  • State of the art NEMA-4X, UL 508 electrical enclosure
  • Compact design for small footprint
  • TEFC mixer motor
  • Factory tested
  • Stand alone operation
  • Seamlessly integrates with other Hydro-Flo offered wastewater products
Wastewater Treatment Equipment